The machine can also simultaneously perform two functions - welding horizontal and vertical seams. By changing the rotation direction of the upper electrode wheel and replacing the lower electrode arm, the two welding methods can be easily switched.

The butt workpiece is automatically clamped and then controlled by the gas-liquid system, first applying voltage and pressing slowly to eliminate workpiece surface oxidation and unevenness.

The butt workpiece is automatically clamped and then controlled by the gas-liquid system, first applying voltage and pressing slowly to eliminate workpiece surface oxidation and unevenness. After the fusion is removed, the end surface of the workpiece to be welded becomes thermoplastic, the welding zone becomes hotter and hotter, and the speed of butt welding increases. Through flash and spatter, the two contacting surfaces are completely welded to each other. Finally, the upper forging is quickly pressurized to weld the two ends of the weld, the current is turned off, and the welding is completed. This type of welding has high strength, good density, no false welding, no slag and no pores.

UN3 series butt welding machine is a special welding equipment for connecting copper and aluminum pipes. It can replace the special high pressure flash butt welding and soldering machine that were originally used. The system uses programmable.

Resistance butt welding is a method of continuously pressing the ends of two workpieces using contact heat to heat the contacting part to a ductile state, and then quickly applying top forging pressure or without adding top forging pressure to maintain only welding pressure to complete the weld.

All-copper water-cooled transformer, imported silicon steel sheet, high load-bearing capacity and longer service life.

There are three main types of battery powered spot welders: AMP-10K AC battery powered spot welder, DPM-10K DC battery powered spot welder and JM-05A precision battery powered spot welder

The automatic X-axis spot (row) welding machine consists of two parts: the welding machine and the working surface.

High quality and high efficiency welding, power factor 98%, three-phase input load balancing, greatly reduced the impact on the user's power grid, output current is constant, smooth, inductance is zero, operating frequency is 1000Hz, timing control accuracy is 1MS

Fully digital microcomputer control system, which can preheat, weld and withstand temperature in three-stage discharge, and equipped with functions such as constant voltage, constant current, constant heating, slow rise, slow fall and storage of multiple sets of welding specifications.