Manual feed type: Manually place the workpiece into the mold, start the welding machine to weld one row at a time, and then manually move to the next row to automatically weld until the welding is completed.
Contact us1.Manual feeding type: Manually place the workpiece into the mold, start the welding machine to weld one row at a time, and then manually move to the next row to automatically weld until the welding is completed.
2.Semi-automatic feeding type: manually set the workpiece, automatically feed the material, the machine automatically welds one row when the material is in place, and then automatically moves to the next row and automatically welds until the whole workpiece is welded, and then the workpiece automatically returns or exits from the rear.
3.Automatic dual-mode feeding type: using double-layer or front and rear dual-mode automatic welding device, using advanced PLC and human-machine control interface and precise servo motor drive system to form an automatic continuous feeding and welding mechanism, there are two sets of molds, one is welding, the other is laying the workpiece, the two modes alternate, the machine can work continuously without interruption, effectively increasing efficiency.
4.Automatic feeding and step type automatic welding: Equipped with automatic cutting device, the horizontal line is placed into the hopper, the vertical line is automatically put into place according to the distance, and then the horizontal line is automatically closed, automatically welded in a row and repeated in turn until the required mesh is welded in its entirety.
It is widely used for multi-point welding of fencing mesh, hardware mesh, shelves, cages, lattice frames, iron reinforcing bars, etc. in various places.
